WASHINGTON PANEL PROS

Vancouver electrical panel replacement & service upgrades

Request electrical panel replacement or a service-upgrade estimate in Vancouver. We qualify the work and help coordinate an independent electrician, with scheduling and handoff support. Bring any Clark Public Utilities service-change requirements into the estimate.

Bring these details to your estimate

Is the property served by Clark Public Utilities, and is the project changing a trench, service line, conduit or meter base that needs the pre-backfill utility inspection?
Will the requested service require CT metering or other utility engineering review, and is the City of Vancouver or L&I the electrical inspection authority for this address?

PLAN YOUR VANCOUVER PROJECT

Plan your Vancouver electrical upgrade.

Choose the work you have in mind. Get the scope questions and a planning checklist, then send a request when you are ready.

Get an estimate for the panel work you need.

Have the electrician document the existing equipment and explain the replacement. The work may retain your current service capacity; separate any meter or utility-service changes in the estimate so you can compare the same scope.

Old panels: what to document Panel replacement or service upgrade?

Use my project checklist

Keep this brief for your own planning or share it with an electrician. It contains no contact information.

Vancouver electrical project: Replace an old panel

Have the electrician document the existing equipment and explain the replacement. The work may retain your current service capacity; separate any meter or utility-service changes in the estimate so you can compare the same scope.

Permit route to confirm: L&I lists Vancouver as a city that issues electrical permits and performs inspections inside its city limits. Confirm the jobsite is in that city program before purchasing the permit.

1. Document the existing panel and equipment I want to add; have an electrician assess condition and capacity.
2. Confirm the electrical permit holder and inspection authority for the jobsite.
3. Confirm the electric provider on the bill (check Clark Public Utilities against the service address); ask about meter-location review, service application and disconnect/reconnect responsibility.
4. Ask for separate panel, service, permit, utility and restoration line items in the estimate.

Read next:
Old panels: what to document: https://washingtonpanelpros.com/guides/old-electrical-panels/
Panel replacement or service upgrade?: https://washingtonpanelpros.com/guides/panel-replacement-vs-service-upgrade/
Estimate checklist: https://washingtonpanelpros.com/guides/quote-line-items/

Get an estimate for this project

Bring charging and heating into one electrical plan.

Share the charger specifications, heat-pump requirements and other planned loads with the electrician. A load calculation and suitable load-management options help establish the work your home needs before you commit to a larger service.

Plan EV charging Plan heat-pump electrical work What a load calculation answers

Use my project checklist

Keep this brief for your own planning or share it with an electrician. It contains no contact information.

Vancouver electrical project: Add EV charging or a heat pump

Share the charger specifications, heat-pump requirements and other planned loads with the electrician. A load calculation and suitable load-management options help establish the work your home needs before you commit to a larger service.

Permit route to confirm: L&I lists Vancouver as a city that issues electrical permits and performs inspections inside its city limits. Confirm the jobsite is in that city program before purchasing the permit.

1. Document the existing panel and equipment I want to add; have an electrician assess condition and capacity.
2. Confirm the electrical permit holder and inspection authority for the jobsite.
3. Confirm the electric provider on the bill (check Clark Public Utilities against the service address); ask about meter-location review, service application and disconnect/reconnect responsibility.
4. Ask for separate panel, service, permit, utility and restoration line items in the estimate.

Read next:
Plan EV charging: https://washingtonpanelpros.com/guides/ev-charger-and-panel/
Plan heat-pump electrical work: https://washingtonpanelpros.com/guides/heat-pump-electrical/
What a load calculation answers: https://washingtonpanelpros.com/guides/load-calculation/
Estimate checklist: https://washingtonpanelpros.com/guides/quote-line-items/

Get an EV project estimate Get a heat-pump project estimate

Compare a complete 200 or 400 amp project.

A larger panel label alone does not establish available service capacity. Ask the electrician to connect your load assessment with the meter equipment, conductors, utility requirements and inspection handoff, so the proposed upgrade covers the whole job.

What changes at 200 amps?When to investigate 400 amps Utility coordination steps

Use my project checklist

Keep this brief for your own planning or share it with an electrician. It contains no contact information.

Vancouver electrical project: Consider 200 / 400 amp service

A larger panel label alone does not establish available service capacity. Ask the electrician to connect your load assessment with the meter equipment, conductors, utility requirements and inspection handoff, so the proposed upgrade covers the whole job.

Permit route to confirm: L&I lists Vancouver as a city that issues electrical permits and performs inspections inside its city limits. Confirm the jobsite is in that city program before purchasing the permit.

1. Document the existing panel and equipment I want to add; have an electrician assess condition and capacity.
2. Confirm the electrical permit holder and inspection authority for the jobsite.
3. Confirm the electric provider on the bill (check Clark Public Utilities against the service address); ask about meter-location review, service application and disconnect/reconnect responsibility.
4. Ask for separate panel, service, permit, utility and restoration line items in the estimate.

Read next:
What changes at 200 amps?: https://washingtonpanelpros.com/guides/100-to-200-amp/
When to investigate 400 amps: https://washingtonpanelpros.com/guides/400-amp-service/
Utility coordination steps: https://washingtonpanelpros.com/guides/utility-coordination/
Estimate checklist: https://washingtonpanelpros.com/guides/quote-line-items/

Get an estimate for this project

Plan for the loads you want to keep running.

Tell the electrician what you want backed up and whether the system will operate in parallel with utility power. Generator transfer equipment, solar and batteries have different connection requirements; put the applicable utility review in the plan before installation.

Generator transfer equipment Utility connection planning

Use my project checklist

Keep this brief for your own planning or share it with an electrician. It contains no contact information.

Vancouver electrical project: Plan backup power or solar

Tell the electrician what you want backed up and whether the system will operate in parallel with utility power. Generator transfer equipment, solar and batteries have different connection requirements; put the applicable utility review in the plan before installation.

Permit route to confirm: L&I lists Vancouver as a city that issues electrical permits and performs inspections inside its city limits. Confirm the jobsite is in that city program before purchasing the permit.

1. Document the existing panel and equipment I want to add; have an electrician assess condition and capacity.
2. Confirm the electrical permit holder and inspection authority for the jobsite.
3. Confirm the electric provider on the bill (check Clark Public Utilities against the service address); ask about meter-location review, service application and disconnect/reconnect responsibility.
4. Ask for separate panel, service, permit, utility and restoration line items in the estimate.

Read next:
Generator transfer equipment: https://washingtonpanelpros.com/guides/generator-transfer-equipment/
Utility connection planning: https://washingtonpanelpros.com/guides/utility-coordination/
Estimate checklist: https://washingtonpanelpros.com/guides/quote-line-items/

Get a backup-power estimate Get a solar / battery estimate

ELECTRICAL PERMIT & INSPECTION

Who handles Vancouver electrical permits?

Vancouver issues electrical permits and performs electrical inspections inside its city limits.

Use the Vancouver electrical permit and inspection process.
Keep the permit number and inspection release with the service-upgrade work order.

Permit jurisdiction reference

L&I lists Vancouver as a city that issues electrical permits and performs inspections inside its city limits. Confirm the jobsite is in that city program before purchasing the permit.

UTILITY SERVICE & CONNECTION

How does utility work fit your upgrade?

Clark Public Utilities customers arrange service-connection changes through their serving utility. The utility’s connection approval is separate from the electrical permit and inspection.

Identify the serving electric account and proposed equipment.
Include the utility’s required service application, meter review and connection steps in the scope.
Use the local procedure and official sources below for the utility-specific requirements.

Service-area reference and requirements

Clark Public Utilities states it provides electric service to more than 240,000 customers throughout Clark County. Confirm the electric account and service address before applying a provider’s requirements.

Confirm the provider for the exact address; city boundaries and electric-service boundaries can differ.

Coordinate the permit and utility steps in the same project plan, so the installation and reconnection can move in sequence.

How is electrical panel work permitted in Vancouver?

Vancouver is a current city electrical-permit jurisdiction; the Clark Public Utilities service guide explicitly routes meter-base/service-entrance inspection through the City of Vancouver or Washington L&I as applicable.

Washington L&I — city electrical permits and inspections Clark Public Utilities New Electric Service Specifications and Requirements Washington L&I: City electrical permits and inspections

What changes the electrical service-work plan in Vancouver?

Clark Public Utilities' New Electric Service guide requires the financially responsible party to initiate the request, submit the address/APN, contractor, description/load information and site plan/easement, and obtain trench/service-line inspection before backfill. CT metering at 400A or greater requires prior utility engineering approval.

Clark Public Utilities New Electric Service Specifications and Requirements Washington L&I: City electrical permits and inspections

What should a panel replacement estimate in Vancouver include?

A complete Vancouver panel replacement estimate identifies the equipment, circuit work, service capacity, permit holder and final inspection records. Meter and utility connection work should be priced separately from a panel-only replacement.

Confirm the serving utility for this Clark County address.
Include the load-review basis and the equipment you want to add.
Identify restoration, utility charges and inspection closeout in the written scope.

Washington Office of Financial Management — 2026 April 1 city/town/county population and county association Washington L&I: Electrical permits, fees and inspections

Vancouver housing-age context

40.2% of housing units were built before 1980: 34,367 of 85,421 housing units. 2024 ACS 5-year estimates; universe: total housing units.

Calculation and uncertainty

Calculation: (B25034_007E+B25034_008E+B25034_009E+B25034_010E+B25034_011E)/B25034_001E. Variable: B25034 (year structure built). The derived share margin of error was not propagated. Source component and total margins of error are retained in the research data; this share is an estimate.

Building age does not establish electrical-panel condition or a need for replacement. Equipment condition and the planned work need their own assessment.

U.S. Census Bureau — 2024 ACS 5-year B25034 estimates and MOEs

Sources and scope

Primary-source research reviewed October 17, 2026 for vancouver electrical panel replacement & service upgrades. Code, utility standards and administrative guidance have different roles. Confirm current requirements for the project address.

The county context for Vancouver

Clark County

OFM April 1, 2026 population estimate: 207,000 residents

THE NEXT STEP

Move your Vancouver electrical project forward.

Tell us about the panel replacement, service upgrade or new equipment you are planning in Vancouver. We qualify the request and help coordinate the electrician handoff and scheduling.

Get your request qualifiedWe organize the project details, location and work type.
Plan the electrician handoffContractor fit, availability and scheduling support.
Agree your work directlyChoose your electrician and approve a written scope.

See the support behind your project

Plan your Vancouver electrical upgrade.

Get an estimate for the panel work you need.

Bring charging and heating into one electrical plan.

Compare a complete 200 or 400 amp project.

Plan for the loads you want to keep running.

Who handles Vancouver electrical permits?

How does utility work fit your upgrade?

How is electrical panel work permitted in Vancouver?

What changes the electrical service-work plan in Vancouver?

What should a panel replacement estimate in Vancouver include?

Vancouver housing-age context

Sources and scope

The county context for Vancouver

Move your Vancouver electrical project forward.

Get an estimate in Vancouver